Author Archives: All American Home Improvement Inc

How Do You Repair A Chimney?

red brick chimney on a housetop

Should You Repair an Unused Chimney?

“Ho Ho Ho! Who’s up on the rooftop?! Down through the chimney came Old Saint Nick …”. Along with ashes, soot, birds’ nest, and other debris, maybe even some bricks and mortar. If you’ve noticed some missing mortar or have had a few bricks fall into the fireplace, it is time for chimney repair

Maybe you don’t use your fireplace and you’re wondering “Why do I need to repair my chimney?” Much like the water heater, the chimney is taken for granted. It is there, it does what it is supposed to. It is part of the house that is worry-free, or so we’d like to think it is. Surprisingly, like a water heater, a chimney does have problems and needs chimney repair, the sooner the better.  Why?  

Why Do You Need Chimney Repair?

Well, if you do use the fireplace, a damaged chimney is a fire hazard. If you don’t use your fireplace, the chimney and the fireplace connected to it are structural parts of your home. If they are weak, so is the wall around the fireplace and the roof supporting the chimney. If you’re not sure that your chimney has issues, here are 7 indicators that chimney repairs are needed: 

  • Efflorescence 

The white discoloration on the chimney is called efflorescence and is fairly easy to remove. However, cleaning and removing the efflorescence doesn’t mean the cause of it is gone. The cause is excess moisture within the masonry and if it isn’t addressed, the chimney will deteriorate without chimney repairs done.

  • Rust

If there is rust on the damper or firebox, it is another indication the chimney has excess moisture. If the damper has rust on it, then it probably isn’t operating right or sealing properly either. If you can see the rust, the flue tiles are probably cracked too. A professional chimney sweep can inspect your chimney flue lining with a special camera to make sure the chimney system doesn’t have a breach. If there is a breach, they can do a chimney repair and make your home safer from possible fire hazards.

  • Deteriorating 

If the mortar joints on the chimney are deteriorating, chimney repair is needed pronto!  This deterioration is exposing the chimney to moisture and accelerating more deterioration of the chimney.  In the far north, like here in Rhode Island and New York, the freezing winter temperatures freeze inside those cracks, then as it thaws, it makes the cracks bigger. Eventually, probably faster than you may think, your chimney could collapse.

  • Shaling

The flue on your chimney is what keeps the fireplace safe to use. When you see thin slices of the chimney tile inside the fireplace, the flue is not doing its job. This is one of the main reasons for annual professional chimney inspection is recommended. A professional chimney sweep will inspect and analyze the entire chimney, with a focus on the flue lining. If they spot any problems, they will advise what chimney repairs are needed and proceed, keeping your chimney safe from any safety breach. 

  • Spalling

If you’re finding bits and pieces of masonry around the exterior of your chimney, this is called spalling. This happens moisture enters the masonry and forces the surface of the brick, concrete, or stone to flake, peel, or pop out. Chimney repair or replacing this damaged masonry is essential in preventing the continued crumbling and destruction of your chimney.

  • Wallpaper

When you notice the wallpaper around and near the chimney has water stains, you probably have chimney damage too. This could be a roof issue, or it could be you need chimney repair because of moisture getting around or in through the flue or other areas of the chimney. 

  • Crown 

This is where hiring a professional chimney sweep is recommended because it requires getting on the rooftop to check.  The chimney crown is an important part of the structure and provides a line of defense from the elements. A cracked chimney crown allows moisture to seep in, and create larger cracks and water around the flue lining. This all leads to other issues we’ve listed her like shaling and spalling.

How do you repair a brick chimney, and what do you use to repair a chimney?

For minor chimney repairs, in most areas, a permit isn’t required. If any bricks have to be removed/replaced, you may need to inquire about a permit and municipal inspection of the finished work. 

The first thing you need to know about how to repair chimney mortar is to watch the weather. Brick chimney repair requiring mortar should never be done when the temperature is below 40 degrees Fahrenheit. If you have a warm day to do the work, make sure the temperature isn’t expected to drop to or below freezing within the next 24 hours. The following are possible repair steps your chimney repair may need: 

  1. Repoint the Brick Mortar

The mortar is the stuff you see between the bricks and holds them together. As seasons come and go, the mortar is battered by the elements and will often begin to crumble and deteriorate. Repointing is necessary to replace the mortar and keep the bricks stable. 

Using a joint raker, scrape any loose and weak mortar. Then with a wire brush, sweep the remaining bits out. With the garden house, spray down the brick and let it dry for 30 minutes. 

While that is drying, mix a batch of mortar up to a stiff peanut butter consistency. Using a pointing trowel, press the mortar in the open joints, getting it so that it matches the existing mortar. With the tuckpointing tool, smooth the joints so that they are concaved and recessed slightly from the brick’s surface.

  1. Caulk the Crown and Flue

The area between the chimney and the flue is a key area that water enters when the joint is not closed and sealed with the crown. The crown is the concrete cap covering the chimney top and typically will have a gap after a few years. That gap allows water inside the chimney flue and into your fireplace. 

Using a wire brush, clean and remove any loose debris like mortar and moss. Then with a caulk gun loaded with high-heat mortar, fill the gap by creating a bead of the caulk.

  1. Large Crown Area Patching

The chimney crown is the top section of the chimney, and it protects the masonry section of the chimney. The sloped shape prevents water from pooling, so when there are cracks in the crown, it can be problematic. This is where ice, snow, and water hit first and can gather if the cap isn’t in good condition. 

Any cracks in a diameter size between 1/8 and 1 inch can be repaired with a pre-mixed cement patch or mortar. Simply inject the mix into the crack using a squeeze bottle and allow it to cure up a minimum of 4 hours, again, this requires planning with the weather!  

  1. Hairline Crack Patching

Hairline cracks can be treated differently than the large cracks we’ve mentioned. Using a high liquid consistency masonry sealer after clearing any loose particles with a putty knife, using a paintbrush, apply the sealer. Two coats are recommended, allowing the first one to completely dry and cure first.

  1. Repair Cracked Bricks

Using a high-heat mortar, you can repair small cracks in one or two individual chimney bricks with a caulk gun. Clean the crack first using a putty knife then sweep it out with a wire brush. Next, squeeze the high-heat mortar into the crack, and with gloves on or using a rag, wipe any excess mortar from the crack.

  1. Replace Cracked Bricks

If there are severely damaged bricks, they need to be removed and replaced. Removing one brick at a time will not affect the adjacent bricks.

Using a masonry chisel slowly chip away the mortar between the bricks. Then bore holes into the mortar using a masonry bit with your drill. Now slowly pull the loosened brick and chisel out any remaining mortar until you have a smooth surface.

With a small trowel, apply the mortar-like butter on bread to all four sides of the new brick, leaving the front or back clean. Push it in place and center it so that you have equal seams on all sides. Using the tuckpointing tool, remove any excess mortar as you smooth the joints.        

How do you repair the inside of a chimney?

Creosote is what builds up inside the chimney, obstructing the flue. When the flue becomes obstructed too much, it can cause exposure to carbon monoxide or even cause a fire inside the house. The best thing you can do is hire a professional chimney sweeper to clean and inspect the chimney and fireplace. The Chimney Safety Institute of America recommends having this done annually just before winter. While the chimney sweep is inspecting and cleaning, they can do any chimney repairs needed inside the chimney too.  

How do you repair a concrete crown on a chimney?

Once you have your ladder securely in place and have safety equipment engaged, chimney repair to the crown is fairly basic: 

  • Small crown cracks: Fill with an acrylic or silicone caulk using a caulk gun and a gloved finger.
  • Cracks that are 1/8” to 1/4” wide using your gloved finger and a stiff paintbrush work the patching material into the large cracks and smooth over the top. 
  • After 15 minutes, brush a liquid seal coating over the entire crown, especially around the inner edges and  outer edges where the crown is joined to the chimney flue. 

Can a roofer repair a chimney?

You should not rely on a professional roofing contractor for chimney repair jobs. A professional roofing contractor will decline to do any chimney repairs and recommend that a professional chimney sweep be contacted.

How much does it cost to repair a cracked chimney?

Professional chimney repairs can vary based on the type and amount of damage. With a masonry chimney, the joints contract and expand with the temperature and cause cracks. Because those cracks will allow carbon monoxide into your home, along with possible embers, the cost of chimney repairs can be a lifesaving expense. 

The average range of professional chimney repairs can start around $200 and reach up to $3,000. In addition to the amount and type of damage, the height of the house will factor into the cost too. 

red brick chimney

In Closing 

With chimney repair expenses possibly getting into the thousands of dollars, a homeowner will want to know if chimney repair is covered under homeowners’ insurance. After all, owning and maintaining a home is expensive enough, if the monthly premium of your homeowners can help with the expense, that would be helpful, right? 

Sadly, the basic aging, wear and tear of a chimney, and repairs are not covered by homeowner’s insurance. If the chimney is damaged by a sudden and unexpected weather event, the chimney repairs would be covered. 

Is gutter installation difficult?

view of gutters from below

Why Gutters Are Important

Having a gutter installation isn’t just for decorative ‘fluff’; it is a necessary home improvement. Most homeowners in New York will have a professional gutter installation, letting a contractor do the work. This gives you the benefit of a guarantee and warranty. A gutter installation isn’t as difficult as you may think, nor is it as easy as it looks. So, you may ask, “Should I hire someone to install gutters?”

While a gutter installation can be a DIY project for a homeowner, we can give you three reasons for hiring a professional contractor for your gutter installation

  • Safety: Realize how high up you’ll be while doing a gutter installation is the first thing to consider. A roof height can be scary, especially when you consider that you’ll have to handle equipment and materials while at that height. 
  • Equipment and Tools: A gutter installation requires specific equipment and tools for a gutter installation job to be done correctly. An experienced contractor will have what they need to do the job correctly and efficiently. A homeowner will need to prepare by buying items they will most likely never use again.
  • Experience: The biggest reason of all! A professional contractor will have been through the necessary training and have acquired hours of experience on gutter installation. By hiring the job out, you will most likely not need to call any one to fix a mistake, but if you do, it will be part of the guarantee and warranty. 

Is gutter installation expensive?

Well, it will depend on the type of gutters you have installed. An aluminum gutter installation with downspouts is the most common request. For a home of 2400 square feet, it can cost $20.00 per square foot for materials and labor. That can cost up to $3,000 per home. This doesn’t include any possible repairs your home may need to the fascia before the gutters can be installed. 

Can I install gutters myself?

With the benefits we listed for having your gutter installation done by a professional in mind, the materials needed are available at any home improvement store for a do-it-yourself gutter installation job. 

So, is it cheaper to install your own gutters?

Well, if you don’t have any accidents like broken windows, roofing materials, or emergency room visits, yes. A DIY gutter installation will save you around $1200 to $1500 for the labor costs. However, there is the extra expense of the equipment and tools needed for a gutter installation. 

What is needed for gutter installation?

When doing your own gutter installation, remember you want to minimize joints, and make the seams strong while keeping them sleek-looking. You’ll need to make sure there is properly installed roof flashing so that the water keeps flowing off the roof and into the gutters. The tools you’ll need for a proper DIY gutter installation are: 

  • A cordless drill
  • A pair of crimpers
  • A pair of duckbill tin snips
  • An extension ladder
  • A hex head driver
  • A pair of offset tin snips
  • A pop rivet gun
  • A safety belt, goggles, and work gloves

In addition to those tools, you’ll need the following materials for your gutter installation: 

  • Self-tapping hex head screws – 1- 1/4″
  • Hex head screws – 1/4″ 
  • Rivets – 1/8-inch medium length
  • Gutter runs 
  • Downspouts
  • Elbows
  • Flashing
  • Hanging straps
  • Gutter sealant

What are the best gutters to buy?

There are different configurations and materials to choose from for your gutter installation. It can be confusing, so we have listed three of the most common here for your consideration: 

  • Vinyl: The most popular choice today for gutter installation, especially for the DIY option. They are budget friendly, never rust, and because they are lightweight and just snap together, the DIY gutter installation is easy! One downside to vinyl gutters in the New York area is the cold weather often makes them brittle and easily cracked. 
  • Aluminum: The gutter installation material before vinyl came along and still popular today. Lightweight, makes DIY job easy and rust-proof makes them long lasting. This gutter material can stand up to cold temperatures and ca be painted to match the home’s architecture. They bend and dent easily and a downside to this material. 
  • Stainless Steel: The more durable option, but the more expensive gutter installation option too. A sturdy material that doesn’t rust, last as long as the house, making this a better investment.

How long does gutter installation take?

Most professional gutter installations average between one to four hours on an average-sized home. For DIY gutter installations, plan a full day for completion. If you decide to upgrade with gutter guards, you can have them installed professionally or do it yourself gutter guard installation is possible too. 

You can purchase the gutter guards and any needed items at your local home improvement store. They are basic, simply slide them over the top of the gutter run after the gutter installation is complete. 

red gutters on a roof

It’s A Wrap! 

Gutter installation can be done in a seamless manner today too. However, that requires a contractor that has the machine mounted on a truck. The gutters are made as they are installed, giving you a seamless gutter installation. They’re a little more expensive, but there are fewer places where the gutters can leak or weaken.

Does my house need gutters?

view up at gutters on a home

So… what are gutters anyway?

Does your home have gutters? If not, maybe you’ve considered having them installed by a professional gutter services company. But have you wondered just what is the function of a gutter, or are they just for looks?  Well, they’re not just for looks – they serve an important function and purpose. 

The gutter system on your home is responsible for water management off the roof. One of the most important of all gutter services is to channel the water that flows off the roof during storms and from melting ice and snow. It manages that water flow to the downspouts, which then redirects the water out and away from your home’s foundation. 

What happens if you don’t have gutters?

Without the gutter services of a gutter system, the rain that flows off the roof will pool and puddle up around the foundation of your home. It will erode the soil and seep under the foundation, eroding the soil under there, and that is only the beginning of your problems. 

Over time, as the rain and water erode the soil around your foundation, it will begin washing your landscaping away. The erosion under the foundation can cause the foundation to sink and crack. With enough cracking and sinking of the foundation, plumbing can get broken, creating another set of problems. This can all happen because your home doesn’t have gutter services installed. 

How does a gutter work?

As we described earlier, the gutter services you should get keep water moving from the roof to the downspouts. What is the difference when considering gutter vs downspout? The downspout receives water from the gutter runs and directs it away from your home’s foundation. Okay, so if all that rain is running off the roof into the gutters, why is gutter cleaning necessary?

Oh, the problems that uncleaned gutters will create are many – and they can get expensive! With gutters that are hindered by blockage, clogged, or otherwise damaged, you can expect any or all of the following: 

  • Rainwater will slide down the exterior sides of your house, damaging the siding. Wood siding is especially prone to damage – that alone is a good reason to get gutter services! 
  • Now that the siding is wet, it will begin to rot, making it attractive to critters and insects because they can get through that rotted wood. From there, they are only a few more chews closer to being inside your house.
  • That rotten, water-damaged wood becomes weak, compromising the integrity of your home. 
  • Damaged, rotten siding is attractive to larger critters too, like raccoons, squirrels, rodents, woodpeckers, and other beasties. These all will eat that water-damaged siding and the roof rafters, creating nests and breeding during the process. 
  • When your gutter services are blocked by ice, leaves, snow, or twigs, it causes the water to back up under the roofing shingles. From there, it soaks through the decking, into the attic, down the inside of walls, and through the ceiling. 

Who does gutter repair?

If you discover a gutter leak, repairing it is essential to the safety and structure of your home. Professional roofing contractors and general handyman services can make repairs. There are companies listed on the internet that offer gutter services like installation and repairs. For the DIY homeowner, there are multitudes of videos online that can walk you through gutter repairs too. 

Having your gutters cleaned once a year by a professional will also give them the opportunity to inspect your gutter system. Like anything, gutters get worn out over time and the contractor may suggest you go through the gutter replacement process instead of getting gutter services like repairs. 

This can be because the age of the gutters means they’ll begin to require more repairs than they’re worth. The gutter runs or downspouts may be broken, rusted, or no longer attached to the house. Before you authorize gutter services like a gutter replacement, you should get two to three more quotes. Compare the details of the quotes and make an informed decision. 

Are gutter guards bad?

While their intended purpose sounds wonderful, there are drawbacks to having them installed as part of your gutter services. They can’t block everything, so there is still debris that finds its way into your gutters and creates a blockage. Then, when you have professional gutter services clean them or clean them yourself, there is the added issue of removing the gutter guards first. 

While not everyone recommends them, not everyone will dissuade you from having them installed. They are a good thing that can go bad, but they also will keep the larger stuff from blocking your gutters and they keep larger critters from building nests inside the gutters. Most experts will tell you not to install them as a value-add because they are still a questionable product. 

worker installing gutters

In Closing 

If your home doesn’t have the benefit of gutter services currently, you should get an experienced contractor to provide you with a quote. Do your research and get a couple more quotes. Depending on where you live, the size of your home, and its surroundings, you may not need gutters all the way around. Meanwhile, if you’re ready for gutter services now, you can reach out to us by calling (516) 986-3979.

What Is Soffit and Fascia On a House?

soffit and fascia

Identifying soffit and fascia

This is a popular question along with, what is the purpose of soffit and fascia? Once it is explained, it makes sense. The soffit and fascia are a part of the roofing system.  Along the underside of the roof rafters is where the soffit is installed.  

The fascia is installed horizontally over the ends of the rafters. Between the fascia and the soffit, the roof rafters are protected against the elements, which makes soffit and fascia repair so important. 

So, is a soffit necessary since it is covering the underside of the rafters? Because it is on the underside, you may think there isn’t much to get under there, right? Wrong!  The soffit replaced the gable vents and hood vents that used to be a part of a home’s construction. The soffit provides the necessary attic ventilation that keeps the warm moisture that collects in an attic moving, keeping condensation from building up and creating mold. Without soffit and fascia repairs and upkeep, your roof will deteriorate faster. 

What is the difference between an eave and a soffit?

The eaves are found on the underside of the roof where the roof attaches to the house and just out a couple of feet.  Roof eaves have an impact on the overall appearance of a home with the intended purpose of directing water away from the exterior walls of your home.

The soffit is attached to the underside of the eaves and is the part you’ll see from the ground.  The soffit, along with the fascia, envelope the rafters of your roof, protecting it from the elements as well as small critters and insects.  When there are soffit and fascia repairs needed, the sooner the better is every roofing contractor’s recommendation. 

What causes soffit damage?

As we’ve explained, the soffit is the part of the roof you see under the eaves or overhang of the roof. The soffit covers and protects the underside horizontally and provides ventilation to the attic, hence the small holes spaced out on the soffit. 

The soffit and fascia repairs are often needed because exposure to the sun and weather. Because these parts have the most exposure, saving the roof, fascia and soffit repair or replacement are a routine part of roof maintenance and upkeep. Without these two components, the roof isn’t going to be adequately protected against the wind and the humid will increase from the moisture building up in the attic. That moisture build up leads to critter invasion, pest infestation, water infiltrating and wood rotting. 

soffit and eaves

How do you replace fascia boards?

When fascia and soffit repairs are needed, a handy DIY homeowner doesn’t have to call a professional soffit and fascia repair company or roofing contractor. There are plenty of online videos that will give you step-by-step instructions on how to repair fascia on house.  For now, we are offering you a few basics on how to repair fascia and soffit:

  1. Remove Shingle Molding: With the flat end of a pry par, pull the narrow shingle molding off the fascia. Save for reusing if it doesn’t break or split.
  2. Remove the Rotted Fascia Boards: Remove any rotted sections of the fascia boards, being careful not to damage any flashing or shingles.
  3. Remove the Old Soffit: Carefully, pull the old soffit down, being cautious of critter and insect nests. 
  4. Remove All Rotted Rafters: With a reciprocating saw, cut out all the rotted rafters. Then cut matching sizes of replacement pieces from pressure-treated lumber.
  5. Attach the Cleat: If your house has a brick chimney, attach a 2×4 cleat to help support the new overhang you’re going to build.
  6. Attach the New Rafter: Clamp a 1×1  backing board in place then attach the new rafter to it with screws and then screw the rafter to the positioned chimney cleat.
  7. Seal the Replacement Soffit: Using a waxy type of waterproof sealer, cover the edges of the new soffit to provide protection from water penetration. The soffit protects your roof, but it needs protecting too. 
  8. Attach the Replacement Soffit: After you have primed the bottom and top surfaces, attach your new plywood soffit to the eave’s underside.
  9. Replace the Crown Molding: Replace the molding you removed earlier along the wall under the new soffit’s rear edge.
  10. Attach the Replacement Fascia: Slide the new fascia in place and with galvanized nails, attach it and cover with putty.
  11. Attach the Shingle Mold: Attach the shingle mold you removed earlier along the top of the fascia, keeping a consistent covering. 

Congratulations!  You just completed your own soffit and fascia repairs and a huge step in maintaining the health and well-being of your home’s roof.  Keeping the roof maintenance done, you’ll come close to keeping that 25 to 30 year lifespan that asphalt roofing manufacturer offer. Call (516) 986-3979 today for your soffit and fascia service needs in Long Island and Farmingdale, NY.

How Do You Repair A Leaking Skylight?

opened skylight

Can skylight break?

What can you do about an interior room in your home that doesn’t have any windows? A room with no natural light can be dark, depressing, and dreary. So, how can you combat that? Install a skylight in the room. For years, skylights have had a negative reputation for leaking. Fortunately, skylight repair is possible. 

Yes, but not easily.  The roof on your home is at risk to the elements, especially hail, wind, or any storm damage, and that puts your skylight at risk too. From hailstones to flying debris and falling tree limbs, a skylight can be cracked. Here in New York, with the abundance of snow we get most winters, that is another factor to consider. The skylight is often the weakest area of the roof, so a heavy snowfall could max the weight load. 

Can you fix a cracked skylight?

A skylight filters the sunlight into your home, and it is wonderful. What if it cracks thought? A cracked skylight can lead to leaking and could also mean your roof has an issue too. You could have a roofing contractor do an inspection and that would include your skylight too but not any roofing contractor will know how to repair skylight. 

You may not be able to afford a professional contractor that knows how to repair skylight glass right away, or it happens on a weekend or holiday. There are something you can do for a temporary skylight repair that will keep water from leaking inside your home: 

Patch the Crack

A small crack you can do a skylight repair by applying clear caulk over the crack. Or a trip to a home improvement store you can look for products that are specifically made for temporary skylight repairs. Keep in mind, this doesn’t hide the crack and the patch won’t be aesthetically pleasing. 

Let It Sit

Most skylights have two layers, and if you’re lucky, the crack is only in one layer and the skylight hasn’t began leaking yet. If this is the case, you can leave it for now and just keep a watch for the crack getting larger. The larger the leak gets, it could start leaking and by then, a skylight repair will turn into a skylight replacement. 

How do you cover a broken skylight?

A skylight opens a room up, giving it natural light, a wonderful addition to any room, until the weather gets bad. So what do you do if hailstones break your skylight, and a contractor can’t get there for skylight repair? You cover it up like you would your roof.  

With extreme care and caution, take a plastic tarp, four 2×4 boards, and nail to the roof. Cover the skylight with the tarp then nail the 2×4 boards, one on each side of the skylight, fasten the tarp to the roof. 

How do you repair a leaking skylight?

Skylight can be a beautiful part of your home, but it can also have major downside: leaks.  As a skylight ages, it can begin to leak because the same climate and environment that ages your roof is getting to the skylight too. Do you need skylight repair or skylight replacement? Here are somethings you can check before you call the professionals:

Does your skylight open? Make sure there isn’t any debris that could be preventing it from closing. Dirt, leaves, twigs, even a bird could be blocking it from closing or blocking the channels and weep  holes that drain water. 

  • Check the weather seals and see if they are broken or cracked. These are an easy replacement and often the cause of a leaking skylight. 
  • Another common cause of a leaking skylight is the insulated glass is damaged around the frame. You can apply a clear silicone caulk for a temporary skylight repair, but usually at this point, a replacement is needed. 
  • If you have an older skylight, it most likely was not installed with a corrosion-resistant material they use today. If the framing has become corrode or rusted, you need to replace your skylight. 
  • It may not be your skylight at all that is leaking. It could be the roofing shingles around the skylight and water is coming in the least resistant path at the skylight. At this point, you need a  professional roofer to inspect your roof and skylight and determine the problem. 
two skylights in ceiling

How do you reseal a skylight glass?

When your skylight was installed, a large hole was cut into the roof.  Then metal flashing was either a part of the skylight or installed with the skylight. If that metal flashing isn’t right, then you’ll have a leaking skylight, repairs must be made! So, time to climb up on the roof or hire an experienced contractor for skylight repair. If you’re going to do the job yourself, we offer the following steps and tips: 

  • Clean the Area: Before making any type of repairs, the area needs to be prepped where the work is needed. Clean off any debris, dirt, and grime with a broom or brush all around the skylight. Gently lift shingles around the skylight and sweep out any debris. 
  • Flashing Check: The metal flashing is usually installed with roofing compound, so if you have a leaking skylight, it could be from an incorrect installation, or the compound has aged and turned loose. If there are turned up edges around the skylight, then the flashing is no longer doing its job. 
  • Repair the Flashing: With a caulking gun and roofing cement, squeeze the gun with even pressure along the areas with missing or worn flashing. Make sure there aren’t any more visible gaps. Apply the cement under the flashing that sitting flat on the roof then with a roofing trowel, smooth the cement over the area. Carefully place the caulking gun tip under the shingles where the flashing is connected and squeeze a bead of the roofing cement under the shingle. Press down and hold for a couple of minutes to assure the shingle sticks. 

If you’re not a DIY person, who can repair skylight that knows how to repair skylight glass or install a replacement?  Since your leaking skylight could be a roof issue, having a roofing contractor inspect your roof is recommended. If you’re going to need a new roof, they can replace the skylight while they’re up there.  However, there are companies that specialize in commercial and residential skylights, and you can find them with an internet search. Call (516) 986-3979 today for your skylight repair in Long Island and Farmingdale, NY.

How Do You Do a Roof Inspection?

circled areas on a roof that need repair

What is a roof inspection?      

The word ‘inspection’ conjures up anxiety for most of us, especially roof inspections. However, roof inspections are a necessary part of homeownership, one more thing to be prepared for and learn what to expect. With some answers to a few questions, we hope to provide some helpful information. 

Roof inspections are the procedure of inspecting your roof, yourself, or a trained professional, to determine the roof’s condition and integrity. There are several reasons why roof inspections are needed: 

  • Roof is aged and worn, needs repair or replacement
  • Weather damage
  • New homeowner insurance check
  • Selling a home
  • Annual roof inspections and repairs

When a roof has been exposed to the weather over a long period of time, there are any number of possible issues that validate the need for roof inspections. The constant changes and shifts in the weather  can cause an accumulation of water in the wooden beams and inside the walls. This will weaken a roof’s integrity and leave it structurally unstable.

Once that water has accumulated and been left for a while, mildew, and mold form, causing more damage to the roof and your home’s structure.  It is also a health hazard as your family is breathing in that mold. 

Because roofs are needed to protect our family and belongings from the weather, routine roof inspections are important. Think of them to be similar to well-baby checkups.  Roof inspections can often catch a small issue before it becomes a life threatening problem. 

What is involved in a roof inspection?

Professional roof inspections will be done by a licensed inspector who will check the roof from different angles and views. They are looking for any possible issues that could involve any damaged, missing parts, the overall condition of the roof, including the drip edge and ridges, the flashing, gutters, and downspouts. What you should expect from professional roof inspections to include is: 

  • Interior inspection: Professional roof inspections will begin with an interior inspection. The inspector is looking for possible water, visible by water stains on the ceilings and walls. They check inside the attic for indication of leaks, moisture, mold, aging insulation, and holes in the roof. 
  • Exterior inspection: Next, professional roof inspections check the exterior of the roof, including climbing up on the roof for a close-up check. They are looking for signs of damage that include damaged and missing shingles, damaged and missing flashing, cracked caulk, possible leaks. 
  • Repair estimate: Once roof inspections are completed, the roofing technician will prepare a report of their findings and include an estimate for any repairs or replacements that are needed. 

Should I get roof inspected?

Insurance companies and roofing experts recommended that roof inspections should be done every 2 years until the roof has aged 10 years, then annually after that. If your home is surrounded by a lot of trees, roof inspections are recommended annually regardless the age of the roof.  Roof inspections should also be performed after any significant weather event that involved hail, hard rain, high winds, ice, or snow.  

How do you know if you have roof damage?

Roof damage will expose the structure of your home to serious problems. Simply because you don’t see it, doesn’t meant it isn’t there. In fact, roof damage can cost you thousands of dollars in repairs or replacement and if your insurance company denies your claim, the entire cost is coming out of your pocket. 

The most obvious sign of roof damage is water stains on the ceilings and walls. A roof leak can be found in the attic with mold and water spots on the insulation and rafters. The siding on your can also provide you a hint of possible roof damage. 

How do you check for roof leaks?

Here are warning signs that you should be aware of that indicate a possible roof leak: 

Broken, Cracked, Loose, Missing Shingles

High winds and hours, days of the sun beating own on the roof will cause roofing materials to break, crack, loosen, and come off. Where this happens, it exposes the roof to damage from the weather. However, if discovered early enough by roof inspections, repairs can be made to save the roof. 

Broken, Loose, Missing Fascia and Soffits

Fascia and soffits that show signs of decay, deteriorating or even missing can be indication of roof leaks, or at the very least, gutter issues. Closer roof inspections can determine what needs to be done then. 

Inspect the Gutters

The damage to the fascia and soffits can be from the gutters coming loose. The gutters can also be full of roofing granules which indicates that the shingles have lost some of the protective layer. Aging, hail, heavy rains, and the heat weaken asphalt granules, then they wash off into the gutter with the rain. Roof inspections often find there is enough granules washed off the roof needs replacing. 

Vents

Roof inspections that find curled shingle edges is caused by improper attic venting that has caused ice dams. These will start allowing rain to get up under the shingles and begin rotting the roof decking, then leaks begin. 

How do you perform a roof inspection?

 If you don’t know how to do a roof inspection, you can always hire a professional, which is recommended at least every 2 years. To do your own roof inspections, follow these tips: 

  1. Inspect the Gutters – make sure they are fastened securely and no breaks in the runs.
  2. Inspect the Flashing – make sure all the flashing is securely in place, and if any is broken, missing, or rusted, replace it.
  3. Inspect the Skylights – average lifespan of skylights is 18 years. Roof inspections should include checking there is no gap in the seal or cracks in the glass. 
  4. Inspect the Chimney – the chimney should be solid with no cracked or missing mortar. Make sure the chimney cap is in place and secure. 
  5. Inspect The Attic – roof inspections should always include the attic, specifically, the ventilation. Inspect for moisture, mildew or mold, and rotted wood. 
damage to shingles on a roof

What do roof inspectors look for?

During roof inspections, the inspector will be looking for hidden and obvious leaks, any unusual wear and tear, and any damage that would be caused by the weather and windblown debris. They also inspect for organic growth on the roof like algae, and they inspect the installation and any areas that have been repaired. Need a roof inspection in Long Island and Farmingdale, NY? Call (516) 986-3979 today!

Which paint is best for home?

blue home

Painting your home

As a homeowner, you have a lot of things you need to take care of around your home painting is one of them. If you’re like many, home painting is at the top of your least favorite thing to do. For those who would like to paint their home, they are stymied with confusion and questions that they are afraid to voice, fear of looking like a beginner. 

When it comes to exterior or interior home painting and decorating, there are some people, men, and women, that simply have “the touch” and it all comes out looking perfect. Then there some of us that may know what we’re doing, but our idea of what looks good for our project home painting or colors that will look good, we miss the mark every time. 

In this piece today, we’re going to answer a few basic questions for a first time home painting project. The answers may help those of us that feel confident in our home painting decisions and skill that miss that mark too. 

Can I paint my whole house white?

If this is a question regarding the interior, cool whites with blue and gray undertones will give your home a crisp feel and loo. A warm white with red and yellow undertones give a relaxed and soft look. You should also take into consideration lighting. Going with a cooler shade of white for interior home painting is better when there is a lot of natural light, a warmer shade for areas that are more cold and gray. 

If you’re thinking about the entire exterior of your home, painting it all white, it can be a beautiful look, but it can be tricky too. An all-white exterior can be blinding for people driving by and your neighbors. It can also look muddy in the right setting.   How can you avoid going either too bright or too “muddy”? You need to choose a white paint with the right LRV (Light Reflectance Value).  

What in the world is LRV? When you’re considering the exterior of your home, painting it white, the LRV is important. LRV is how dark or light paint is measured, with dark being a zero and light being a 100. For exterior home painting, the LRV should not be more than 85 or you, your neighbors, and anyone that drives by will need sunglasses. 

Should I paint my whole house the same color?

For the exterior or interior, home painting all in one color is not recommended. Yes, going with one color all the way will be easy, but on the interior, home painting all one color, the color will differ from room to room. Even from one corner to the next, color changes because of several factors, the biggest one is the undertones. Other factors that can make colors change appearance of the interior home painting are: 

  • Lighting: Natural light in abundance or the lack of natural lighting will change how colors appear. If there is an abundance of natural light in the living room, it open and welcoming. That same color in a bedroom with artificial lighting can look cold and dark.  
  • Lighting: The ambient lighting you choose with light fixtures and placement will affect the interior home lighting too. Even the type of bulbs you use affect how a room looks. 
  • Influence from Outside: Using a neutral color for interior home painting is how the outside will affect it from green foliage of shrubs, trees, grass and more. Or is there red clay soil around the exterior with blues and grays of water nearby? The same color throughout your home, painting to each room with these things in mind will affect how that color looks different.

How do I choose paint for my house?

You have a color scheme set in your mind then you get to the paint cards and realize there isn’t just a basic red, white, blue, or any other color. So how do you know which one is the right one for home painting project? Here we offer a few tips that have been handed down from others, they may help you avoid making the same mistakes: 

Inspiration First – Paint Color Next

Yes, that is the biggest part of this home painting project, and it naturally seems to be the first step.   You need to find your inspiration first. Some people have found their color inspiration at a local coffee shop, others have used the color of blanket on display at a store. 

Pinterest is a great place to find inspiration and you can create your own board as you find ones you like. Once you have 10 to 12 boards, it’s time to start getting serious. 

Stay Neutral

No, this doesn’t mean to avoid all colors, but you should determine what in the room, or on the exterior of your home, do you want to be the eye catcher. If the walls in the living room are where you want your guests’ eyes to go, then choose a bold color. If there is an architectural feature of your home, painting it so that it has the accented color pop should be the focus. Once you have your bold color or pop color, go with neutral colors around it so that it is the bold or the pop. 

Pain Testers – Your Best Friend

Yes, you’ll have to pay for these, so wait until you have narrowed down your inspirations then choose a few colors in different shades. Then do a large enough house painting area on a couple of different walls of the room to see how it works with the light. If you’re doing an exterior home painting project, paint a few spaces around the entire house to see how it looks, and check these areas, exterior and interior, different times of the day. After about a week, you’ll know which paint is the right color. 

Test with Fabrics and Furniture

While you have the test areas of home painting on the walls, hold the curtains, bedspreads, throw pillows, and other items to make they match or mismatch, whatever works with your inspiration plan. 

The Sheen

Sheen can be a bonus and it can also accent the flaws. This is more for older homes where the flaws are part of the charm, avoid home painting with sheen paint if you don’t want those flaws to show. 

Understanding Undertones

From the paint strips you take home, using the darkest color will give you the truest color. Undertones are not to be under appreciated! 

Have a House Painting Color Theme

This does not mean your house painting project should all one color throughout  your entire home. If you can’t choose a color for each room, and yes that can be a challenge, then choose various shades of the same color for each room. A little darker in one room and then go lighter in the next. Touring model homes is a perfect way to get home painting ideas and inspirations! 

How many paint colors should a house have?

For exterior home painting projects, three different colors is the industry’s general rule of thumb. Some homeowners will keep the hues monochromatic and others will choose distinct color differences between the three. Either way works, choose what works for your tasteyou’re your home’s architectural style. 

painting options

 What is the color for 2021?

To determine what the “in” colors are for 2021, you can do an internet search for “home painting near me” and see what architects, builders, and designers are going with this year. For the exterior home painting and design choices, the popular colors this year should be trimmed in pale blues and greens then accented with bronze for that designer touch: 

  • Warm, Creamy Whites
  • Pale Gray
  • Beige

Choosing home painting finishes can be confusing, so here is a guideline to help you: 

  • Flat or Matte: No shine and ideal for low traffic area and ceiling.
  • Flat Enamel: Very minimal shine but easy to clean, ideal for low traffic area or homes with kids and pets.
  • Eggshell Enamel: A little shine, ideal for moderate traffic areas and typically wipes clean with a damp cloth.
  • Satin Enamel: Slight shine that is ideal for a high traffic area and moist areas like bathrooms and kitchens.  
  • Semi-Gloss Enamel: Shiny and ideal for cabinets, trim, and moisture areas.
  • Hi-Gloss Enamel:  Super shiny, almost like glass and ideal for high traffic and furniture.

Need expert help with home painting in Long Island and Farmingdale, NY? Call (516) 986-3979 with All American Home Improvement Inc today.

Should I replace all windows at once?

Windows in a kitchen

Is it worth getting new windows?

Are feeling those cold front winds blowing in around your windows? Even the slightest bit is too much and is reason enough to consider window replacement for your home. Why? Because if you’re feeling cold drafts coming in, that means that warm air you’re paying to create it going out. Do you want to pay for warming up the outside too? 

Getting window replacement for houses isn’t cheap, we realize that, but neither are the utility bills for heating and cooling. In our article today, we’re going to answer some commonly asked questions about window replacement. We’ll provide you enough reason to make a logical decision that will save you money in the long run. 

Learn More

As you feel that cold air coming in around your windows, you’re contemplating window replacement or repair what you have in place for now. However, you can see the value in a window replacement job being a home improvement investment for you now or if you decide to sell your home. Here are four factors to consider if this is the right decision for you, your budget, and your home:

  • Window frame condition
  • The climate
  • Current window thickness
  • The style of current windows 

These are factors that should influence your decision if the cost of window replacements is a good thing to consume. If the windows in your home are less than ten years old and have begun having a draft around them, window repairs would be the better option. Simply install sealing along the frames and reseal the double windows will bring your windows back to the insulative properties that you want.

Which replacement window is best?

If you’re considering getting replacement windows, here are a few things to help you choose the best window replacement for you: 

  • Determine your budget and most you can afford.
  • What style of new replacement windows do you prefer?
  • Is energy-efficiency important to you?
  • What style and type of frames do you prefer?
  • What warranty options are important to you?
  • Do want professional installation?

Now that you have the answers to those questions, here are the three most popular window replacement choices and why: 

Pella Windows

An energy-efficient, high-quality window with a history of 100 years’ experience. Their energy-efficient product line meet or exceed ENERGY STARⓇ certifications for all fifty states and they offer a wide selection of colors, materials, and styles. Their double-hung windows can cost up to $355 depending on the window you choose. 

Andersen Windows

Know for being energy-efficient and with little maintenance. Modern styles that have a long lifespan and there are options to design windows yourself.  Their double-hung window replacement choices start around $409.

Simonton Windows

A great choice for vinyl window replacements with an excellent customer service and a warranty that backs their quality commitment. Owner of several awards for the quality and the performance of their product, known for durability. Their double-hung window replacements can start as low as $150 and cost as much as $1,000. 

Is replacing a window easy?, Can I replace a window myself?

A homeowner that is handy with tools and has some home-improvement experience can install their own window replacement and save some money. A few things you may want to consider before taking on this job though:

  • Time: Because you don’t do window replacement every day, this is going to take you long than it would a professional. 
  • Tools: It is going to take you longer because you don’t do it every day and you don’t have all the proper equipment and tools. 
  • Warranty: Many, if not all window replacement manufacturers aren’t going to honor their warranty if they aren’t installed by a certified contactor. 
  • Workmanship: If a window gets broke while you’re doing your own window replacement, you have to replace it at your expense. If a contractor breaks a window, and they are less likely to than you, they have to replace it at their expense. 

Will new windows help with electric bill?

Yes, and like you, new window replacement is why most homeowners make this investment. Having an Energy Star-qualified window replacement will help you save on your energy expenses, as much as $450 annually. The type of windows you purchase and the area of the country where you live will affect these numbers. 

window over sink

What time of year is best to replace windows?

Ideally, a window replacement job is best during the spring when the weather is warm, but not blistering hot. 

If you are considering window replacement without removing frame, keep in mind that even window replacement 10 years ago will have began losing its seal (remember we mentioned that earlier in this piece). This can be partly the sealing around glass, but it is more likely to be around the window frame.  

A full frame window replacement job will remove your existing windows, including the framing, completely down to the studs. Your new window replacement, including the frame, will include an inspection and repairs of any water damage to be done by a professional. While it will cost you a little more money, the savings in utilities are going to be an ROI for that money spent. Call (516) 986-3979 today for window replacement in Long Island and Farmingdale, NY with All American Home Improvement Inc today.

Is Slate Roofing a Good Investment?

slate roofing on a home

Is slate tile outdated?

A slate tile installation can look beautiful on a home when done correctly, even a home that you wouldn’t think is styled for slate tile. Slate tile can give any design and size of home a look of elegance, especially slate tile roofing.

Fashions come and go on the runways of New York and Paris, and so do the fashions of homes. We’ve gone from big open rooms to smaller private rooms, back to big open concept, and after the recent pandemic, we’re back to smaller, private rooms. Are we ever happy? 

The fashion of having a slate tile installation on the roof has come and gone and is on the comeback. Where you once would have found it on exquisite properties worth of the money and time to have a slate tile installation, there are pros and cons to choosing this type of roofing material: 

The Pros of Having A Slate Tile Installation

  • Longevity: A slate tile installation for your roof will eliminate needing a new roof for decades. 
  • Aesthetics: A slate roof is natural look that is cherished on home of grandeur. 
  • Value: A slate tile installation is expensive, but the value is in the investment. 

The Cons of Having A Slate Tile Installation

  • Structural Requirements: A slate roof is heavy and requires the structure to withstand as much as 1,900 pounds per square. 
  • Cost: As mentioned above, a slate tile installation is expensive, especially when comparing Slate tile vs asphalt shingles
  • Difficult Installation: A slate tile installation must be done by somebody that is experienced working with slate tiles. It is fragile, heavy, and replacing a broken piece could be impossible to match.
  • Install Time: A slate tile installation roofing job take longer than any other roofing material because of the extreme care required and the heavy weight of each tile. 

Why is slate tile expensive? 

Like any natural stone floor installation, slate tile installation is not cheap, ad this starts at the point where slate if mined. The material is mined from certain areas, mostly by hand. Then the heavy product is shipped to the factory, where it is cut down in smaller pieces to sell.  To have it installed by a professional, this gets costly because of the care it requires and the weight of  slate. So, yes, slate tile installation is a costly investment unless you’re a DIY person, but for a roofing job of this heavy material, we don’t recommend making that attempt. 

Is slate tile hard to install?

A square of slate will cover 100sq ft and weighs  900 pounds. That is the same as nine pound per square foot. You don’t want to pay an inexperienced roofing contractor to do your roof tile installation job.  This job should only be done by an installer that has slate tile installation experience. 

Because the material is so heavy, and a minimum pitch of 4/12 pitch is required, as well as a reinforced structure that can hold the weight. A slate tile installation will weigh up to two time as much as asphalt shingle roofing. 

How do you install slate tile?

 So, you want to do your own roof slate tile installation and your asking, “What is the best way to install slate tile?”. Remember, this is a heavy material and must be installed correctly or you’ll have problems later. This is why most homeowners will hire a contractor to complete the slate tile installation. However, if you’re ready to attempt this, we offer the following basic steps: 

  1. Confirm the roof is properly constructed for the weight of slate tiles. 
  2. Choose the right slates based on color, size, thickness, and type.
  3. Research and study slate roof tile and slate tile installation before starting. 
  4. Gather your tools, making sure you have the correct tools like a slate cutter, slate ripper, and a slate hammer.
  5. Underlayment is not sufficient for waterproofing. Use a double half-lap of felt with the headlap increased along the eaves. 
  6. Make sure your starter course has ample headlap. 
  7. Blend the different slates if coming from several pallets.
  8. Get the headlaps and side laps right to avoid condemning the entire roof. 
  9. During the slate tile installation, avoid walking on the slate tile. 
  10. Mark your courses with red chalk on the roof surface, not the slate tile. 
  11. Lay The starter slates with the backside facing up. 
  12. Avoid over-nailing or under-nailing and use only copper or stainless steel roofing nails. 
  13. Use quality flashing material like 20-ounce copper or stainless steel. 
  14. Use a quality hip and ridge system. 

Do you need to seal slate tile?

Generally speaking, after your  slate tile installation, the slate will not require a lot of maintenance. This natural stone doesn’t rust or warp and is mold resistant.  It is a rare occasion for a slate tile roof to be damaged by a natural event with the exception of an earthquake or a tornado. However, walking across a slate tile roof will crack the tiles, so walking on your roof should be avoided. 

slate roofing on a roof

Can slate tile be repaired?

Yes, and when it comes to natural stone roofing, a slate tile is a durable material. Should it get chipped or cracked, it is easy to repair by an experienced contractor that works with slate. The ease of Slate tile repair and replacement is one of the main attractions to this material.

If a slate tile roof is your desire, you’ll want to get an engineering inspection first. The weight of the slate needs a sturdy structure.  Next, you want to get several quotes on an installation, making sure the one you choose is an experienced contractor with slate tile installation and repairs. This is going to be the roof you have for decades, make sure you’ll be happy with the finished product. Call (516) 986-3979 today for your slate tile installation in , NY with All American Home Improvement Inc.

When is Chimney Repair an Emergency?

chimney in need of repair

Knowing when to call for emergency repair

As ancient British folklore has said, shaking hands with a chimney sweep will bring you good luck, what can you expect when you shake the hands of a foundation, masonry, or roofing professional? Yes, one of the three could bring you the person you need when you need chimney services, depending on what it is you need.  

When it comes to Servicing a chimney, it isn’t a one call does it all sort of job. A professional chimney sweep can clean the chimney from top to bottom, all the way into the flue.  A masonry can repair a brick chimney that has missing mortar and bricks as well as replaced the metal flashing around the base.  Then a professional roofing contractor can repair or replace the metal flashing around the base of the chimney.

When you need Chimney services and repairs, who should you call first? It is unlikely that you’ll know if flashing is bent or missing unless you’ve braved the ladder to the roof top. One way you could tell if the flashing was bent, damaged, or missing would be rain leaking into your house around the chimney. That type of chimney services would be either a professional chimney sweep or a professional roofing contractor.

In that case, choosing the chimney sweep would be recommended if you haven’t had your chimney, fireplace or flue professional cleaned recently. If you’re like most homeowners, you probably haven’t had a professional chimney services that includes cleaning the chimney, fireplace, and flue. If you don’t use your chimney, calling a roofing contactor would suffice as they can provide chimney services with repairs. If your chimney needs professional chimney services like cleaning, they can advise you at that time.

How do I know if my chimney needs a new liner?

When you’re noticing that there is a fast deterioration of your chimney’s inner walls, it is time to call professional chimney services.  A chimney liner made of clay tile or cast-in-place  lifespan is typically around fifty years. A stainless steel flue liner has a lifespan up to 20 years, depending on the quality of the liner material.

There are four reasons why a professional chimney services specialist recommends a new liner:

  1. Damaged or deteriorating: When the chimney flue liner shows cracks and gaps, it has become a safety risk. Those cracks and gaps are allowing carbon monoxide and hot embers through the chimney, increase the risk of a house fire and carbon monoxide poisoning. A deteriorating chimney flue can also possible structural damage that needs the attention of a foundation contractor.
  2. Condensation: When the temperature in a chimney flue is too low, it creates condensation and causes to corrosion. Condensation is also can be an indication of poor airflow, making the fires inefficient and producing less heat while building up creosote buildup.
  3. A Different Fuel or New Fireplace Insert: If you have converted your traditional wood-burning fireplace to a gas fireplace, or you’ve had a new insert installed, you may not have the correct venting requirements.  Professional chimney services can determine this for you and advise accordingly.  
  4. Damaged or No Liner: If there isn’t a liner or the existing liner is corroded, deteriorating, or warped, it is time to have a chimney line installed or the current one replaced.

When should a chimney be replaced?

The chimney on your home has an important job. It directs flames, heat, and dangerous gasses from  your home, keeping your family and home safe. It is extremely important to schedule regular cleaning, inspection, and maintenance for the chimney to make sure all is working as intended. These professional chimney services can catch issues with your chimney before they become dangerous, expensive, and life threatening problems.

It is rare, but there are times that a chimney needs to be totally replaced. One example would be that the chimney has deteriorated so far that it is a structural liability, like a leaning chimney. Even a slightly leaning chimney can lead to a dangerous situation if not addressed and repaired. Other issues that your chimney may be having:

The Crown

The very top of a chimney is called the crown. The job of the crown is to keep debris and water out of the chimney and possibly cause damage to your home. Indications that your chimney crown needs chimney services would  be  any of the following: cracks, damper rusted, firebox rusted, mortar joints damaged, bricks spalling, and interior walls around the fireplace show signs of water damage.

Bricks and Mortar

When you notice and loose or missing bricks, missing mortar joints, it is time to call for professional chimney services. Cracked, loose, or spalled bricks allow serious damage to happen if not  taken care of immediately. This is something a professional masonry can do with tuckpointing. This includes removing the damaged and old mortar and install new mortar to make the chimney stabile again.

Can you repair a chimney in the winter?

Traditional chimney repair services should not take place in temperatures of 40 degrees or lower. When the temperatures get that cold, they typically are associated with wet weather, which masonry materials will not cooperate and stick. It is best to have your chimney serviced in the spring when any masonry repairs have the chance of setting and sticking.

Will homeowners insurance cover insurance chimney repair?

The chimney is considered as part of a home’s structure. Every homeowner’s insurance policy will vary, but as HO3, the typical homeowner’s insurance will  cover chimney repairs for damaged caused by a covered peril, like storms and wind damage.

What homeowner’s insurance does not cover is the basic maintenance or uncovered perils. Like the roof, if the insurance adjustor determined that the chimney damage is due to owner neglect, they will deny any claim.

chimney repaired

How much does it cost to repair a leaking chimney?

Chimney leaks are a common issue, especially for older homes or homes with brick chimneys. They begin to leak, which can originate in a number of areas of the chimney  then seep down into a home’s structure.  From there, it goes beyond chimney repairs and creates structural issues where mildew and mold form.  

In 2017 the average chimney and fireplace repair was between $85 and up to $1600.00. Water leak repairs at the chimney crown or roofline averaged between $150 up to $350 on average.

One thing is for certain when you hire a contractor for chimney services and repairs, you want to hire one that has proven experience in how to repair a chimney. A chimney leak isn’t always what it seems to be, so when you have water stains on the ceiling and walls close to the chimney, it may not be the chimney leaking but the roof.

The chimney on your home is a part of the structure, whether you use the fireplace or not.  Having it inspected once is recommended regardless, and if you use the fireplace for heat, it should be a “must-do” on your homeowner’s list of chores and tasks. Call (516) 986-3979 with All American Home Improvement Inc today for your chimney repair in Long Island and Farmingdale, NY needs.