Author Archives: All American Home Improvement Inc

Is Slate Roofing a Good Investment?

slate roofing on a home

Is slate tile outdated?

A slate tile installation can look beautiful on a home when done correctly, even a home that you wouldn’t think is styled for slate tile. Slate tile can give any design and size of home a look of elegance, especially slate tile roofing.

Fashions come and go on the runways of New York and Paris, and so do the fashions of homes. We’ve gone from big open rooms to smaller private rooms, back to big open concept, and after the recent pandemic, we’re back to smaller, private rooms. Are we ever happy? 

The fashion of having a slate tile installation on the roof has come and gone and is on the comeback. Where you once would have found it on exquisite properties worth of the money and time to have a slate tile installation, there are pros and cons to choosing this type of roofing material: 

The Pros of Having A Slate Tile Installation

  • Longevity: A slate tile installation for your roof will eliminate needing a new roof for decades. 
  • Aesthetics: A slate roof is natural look that is cherished on home of grandeur. 
  • Value: A slate tile installation is expensive, but the value is in the investment. 

The Cons of Having A Slate Tile Installation

  • Structural Requirements: A slate roof is heavy and requires the structure to withstand as much as 1,900 pounds per square. 
  • Cost: As mentioned above, a slate tile installation is expensive, especially when comparing Slate tile vs asphalt shingles
  • Difficult Installation: A slate tile installation must be done by somebody that is experienced working with slate tiles. It is fragile, heavy, and replacing a broken piece could be impossible to match.
  • Install Time: A slate tile installation roofing job take longer than any other roofing material because of the extreme care required and the heavy weight of each tile. 

Why is slate tile expensive? 

Like any natural stone floor installation, slate tile installation is not cheap, ad this starts at the point where slate if mined. The material is mined from certain areas, mostly by hand. Then the heavy product is shipped to the factory, where it is cut down in smaller pieces to sell.  To have it installed by a professional, this gets costly because of the care it requires and the weight of  slate. So, yes, slate tile installation is a costly investment unless you’re a DIY person, but for a roofing job of this heavy material, we don’t recommend making that attempt. 

Is slate tile hard to install?

A square of slate will cover 100sq ft and weighs  900 pounds. That is the same as nine pound per square foot. You don’t want to pay an inexperienced roofing contractor to do your roof tile installation job.  This job should only be done by an installer that has slate tile installation experience. 

Because the material is so heavy, and a minimum pitch of 4/12 pitch is required, as well as a reinforced structure that can hold the weight. A slate tile installation will weigh up to two time as much as asphalt shingle roofing. 

How do you install slate tile?

 So, you want to do your own roof slate tile installation and your asking, “What is the best way to install slate tile?”. Remember, this is a heavy material and must be installed correctly or you’ll have problems later. This is why most homeowners will hire a contractor to complete the slate tile installation. However, if you’re ready to attempt this, we offer the following basic steps: 

  1. Confirm the roof is properly constructed for the weight of slate tiles. 
  2. Choose the right slates based on color, size, thickness, and type.
  3. Research and study slate roof tile and slate tile installation before starting. 
  4. Gather your tools, making sure you have the correct tools like a slate cutter, slate ripper, and a slate hammer.
  5. Underlayment is not sufficient for waterproofing. Use a double half-lap of felt with the headlap increased along the eaves. 
  6. Make sure your starter course has ample headlap. 
  7. Blend the different slates if coming from several pallets.
  8. Get the headlaps and side laps right to avoid condemning the entire roof. 
  9. During the slate tile installation, avoid walking on the slate tile. 
  10. Mark your courses with red chalk on the roof surface, not the slate tile. 
  11. Lay The starter slates with the backside facing up. 
  12. Avoid over-nailing or under-nailing and use only copper or stainless steel roofing nails. 
  13. Use quality flashing material like 20-ounce copper or stainless steel. 
  14. Use a quality hip and ridge system. 

Do you need to seal slate tile?

Generally speaking, after your  slate tile installation, the slate will not require a lot of maintenance. This natural stone doesn’t rust or warp and is mold resistant.  It is a rare occasion for a slate tile roof to be damaged by a natural event with the exception of an earthquake or a tornado. However, walking across a slate tile roof will crack the tiles, so walking on your roof should be avoided. 

slate roofing on a roof

Can slate tile be repaired?

Yes, and when it comes to natural stone roofing, a slate tile is a durable material. Should it get chipped or cracked, it is easy to repair by an experienced contractor that works with slate. The ease of Slate tile repair and replacement is one of the main attractions to this material.

If a slate tile roof is your desire, you’ll want to get an engineering inspection first. The weight of the slate needs a sturdy structure.  Next, you want to get several quotes on an installation, making sure the one you choose is an experienced contractor with slate tile installation and repairs. This is going to be the roof you have for decades, make sure you’ll be happy with the finished product. Call (516) 986-3979 today for your slate tile installation in , NY with All American Home Improvement Inc.

When is Chimney Repair an Emergency?

chimney in need of repair

Knowing when to call for emergency repair

As ancient British folklore has said, shaking hands with a chimney sweep will bring you good luck, what can you expect when you shake the hands of a foundation, masonry, or roofing professional? Yes, one of the three could bring you the person you need when you need chimney services, depending on what it is you need.  

When it comes to Servicing a chimney, it isn’t a one call does it all sort of job. A professional chimney sweep can clean the chimney from top to bottom, all the way into the flue.  A masonry can repair a brick chimney that has missing mortar and bricks as well as replaced the metal flashing around the base.  Then a professional roofing contractor can repair or replace the metal flashing around the base of the chimney.

When you need Chimney services and repairs, who should you call first? It is unlikely that you’ll know if flashing is bent or missing unless you’ve braved the ladder to the roof top. One way you could tell if the flashing was bent, damaged, or missing would be rain leaking into your house around the chimney. That type of chimney services would be either a professional chimney sweep or a professional roofing contractor.

In that case, choosing the chimney sweep would be recommended if you haven’t had your chimney, fireplace or flue professional cleaned recently. If you’re like most homeowners, you probably haven’t had a professional chimney services that includes cleaning the chimney, fireplace, and flue. If you don’t use your chimney, calling a roofing contactor would suffice as they can provide chimney services with repairs. If your chimney needs professional chimney services like cleaning, they can advise you at that time.

How do I know if my chimney needs a new liner?

When you’re noticing that there is a fast deterioration of your chimney’s inner walls, it is time to call professional chimney services.  A chimney liner made of clay tile or cast-in-place  lifespan is typically around fifty years. A stainless steel flue liner has a lifespan up to 20 years, depending on the quality of the liner material.

There are four reasons why a professional chimney services specialist recommends a new liner:

  1. Damaged or deteriorating: When the chimney flue liner shows cracks and gaps, it has become a safety risk. Those cracks and gaps are allowing carbon monoxide and hot embers through the chimney, increase the risk of a house fire and carbon monoxide poisoning. A deteriorating chimney flue can also possible structural damage that needs the attention of a foundation contractor.
  2. Condensation: When the temperature in a chimney flue is too low, it creates condensation and causes to corrosion. Condensation is also can be an indication of poor airflow, making the fires inefficient and producing less heat while building up creosote buildup.
  3. A Different Fuel or New Fireplace Insert: If you have converted your traditional wood-burning fireplace to a gas fireplace, or you’ve had a new insert installed, you may not have the correct venting requirements.  Professional chimney services can determine this for you and advise accordingly.  
  4. Damaged or No Liner: If there isn’t a liner or the existing liner is corroded, deteriorating, or warped, it is time to have a chimney line installed or the current one replaced.

When should a chimney be replaced?

The chimney on your home has an important job. It directs flames, heat, and dangerous gasses from  your home, keeping your family and home safe. It is extremely important to schedule regular cleaning, inspection, and maintenance for the chimney to make sure all is working as intended. These professional chimney services can catch issues with your chimney before they become dangerous, expensive, and life threatening problems.

It is rare, but there are times that a chimney needs to be totally replaced. One example would be that the chimney has deteriorated so far that it is a structural liability, like a leaning chimney. Even a slightly leaning chimney can lead to a dangerous situation if not addressed and repaired. Other issues that your chimney may be having:

The Crown

The very top of a chimney is called the crown. The job of the crown is to keep debris and water out of the chimney and possibly cause damage to your home. Indications that your chimney crown needs chimney services would  be  any of the following: cracks, damper rusted, firebox rusted, mortar joints damaged, bricks spalling, and interior walls around the fireplace show signs of water damage.

Bricks and Mortar

When you notice and loose or missing bricks, missing mortar joints, it is time to call for professional chimney services. Cracked, loose, or spalled bricks allow serious damage to happen if not  taken care of immediately. This is something a professional masonry can do with tuckpointing. This includes removing the damaged and old mortar and install new mortar to make the chimney stabile again.

Can you repair a chimney in the winter?

Traditional chimney repair services should not take place in temperatures of 40 degrees or lower. When the temperatures get that cold, they typically are associated with wet weather, which masonry materials will not cooperate and stick. It is best to have your chimney serviced in the spring when any masonry repairs have the chance of setting and sticking.

Will homeowners insurance cover insurance chimney repair?

The chimney is considered as part of a home’s structure. Every homeowner’s insurance policy will vary, but as HO3, the typical homeowner’s insurance will  cover chimney repairs for damaged caused by a covered peril, like storms and wind damage.

What homeowner’s insurance does not cover is the basic maintenance or uncovered perils. Like the roof, if the insurance adjustor determined that the chimney damage is due to owner neglect, they will deny any claim.

chimney repaired

How much does it cost to repair a leaking chimney?

Chimney leaks are a common issue, especially for older homes or homes with brick chimneys. They begin to leak, which can originate in a number of areas of the chimney  then seep down into a home’s structure.  From there, it goes beyond chimney repairs and creates structural issues where mildew and mold form.  

In 2017 the average chimney and fireplace repair was between $85 and up to $1600.00. Water leak repairs at the chimney crown or roofline averaged between $150 up to $350 on average.

One thing is for certain when you hire a contractor for chimney services and repairs, you want to hire one that has proven experience in how to repair a chimney. A chimney leak isn’t always what it seems to be, so when you have water stains on the ceiling and walls close to the chimney, it may not be the chimney leaking but the roof.

The chimney on your home is a part of the structure, whether you use the fireplace or not.  Having it inspected once is recommended regardless, and if you use the fireplace for heat, it should be a “must-do” on your homeowner’s list of chores and tasks. Call (516) 986-3979 with All American Home Improvement Inc today for your chimney repair in Long Island and Farmingdale, NY needs.

Is Vinyl Siding Easy to Install?

A Construction Worker Installs Siding.

Is vinyl siding easy to install?

More and more people are choosing vinyl siding for their homes. Other than being attractive and versatile, vinyl siding’s popularity has increased because it’s relatively easy to install. In fact, it’s become a do-it-yourself staple in home centers and often comes with complete installation instructions.

That said, installation can be complicated by several factors, especially temperature. Vinyl siding expands and contracts when temperatures change, so you have to be careful when purchasing it. While most standard siding comes in 12-foot sections, it’s advised to cut it short if installing it yourself to adjust for expansion and contraction when it’s placed on your house. This is something professionals like All American Home Improvement Inc do when they are installing siding. If you want expert professionals for siding installation in Long Island and Farmingdale, NY, give us a call at (516) 986-3979.

How is siding installed?

If you’re planning on siding your home, one of the most popular types of siding used is vinyl siding. That’s because it’s relatively easy to install. How do you hang siding yourself? For successful siding installation follow these tips:

  • Apply siding to a smooth, flat surface. Siding needs to be installed over sheathings such as plywood or foam plastic, rather than attached directly to studs.
  • Install the siding over a water-resistant barrier. These barriers are key to preventing water intrusion.
  • Install flashing around doors, windows, and other openings. Also install flashing on inside and outside corners, as well as along wall intersections. Flashing prevents water intrusion and is installed before the siding.
  • Use the right type of fasteners, preferably aluminum or galvanized steel nails, screws, or staples. Use aluminum or stainless steel fasteners for aluminum trim.

Do you install soffit before siding?

While actually hanging siding is relatively easy, siding installation can be complicated by several factors. You have to make sure the siding itself is the right size, which often means cutting it short to adjust for expansion and contraction. You also have to consider installing flashing around windows and other openings. Flashing needs to be installed first before the siding is installed.

Another area you have to consider is the soffit, which primarily connects exterior walls and eaves, and aids with roof ventilation. It’s generally recommended that you install soffit before you install siding, although some contractors install siding first on straight runs. Installing the siding first can give you a cleaner look.

Siding installation around windows

Windows and other openings can complicate siding installation. One important thing to do when installing siding is to install flashing around the bottom corners of windows. The flashing prevents water intrusion and needs to be installed first before the siding. The flashing is overlapped onto the row of siding that’s installed below the window. Windows and doors and other openings should also have furring installed completely around them before installing siding.

What is shingle siding installation?

One siding option available to improve curb appeal is cedar shingle siding. While installing this type of siding can take longer than other types, it will give your home a rich, textured look. It has to be installed over plywood, board, or OSB (oriented strand board) sheathing and should be applied in a triple layer. It takes about four days to complete this type of siding installation.

Siding installation for mobile home

You have as many options for siding installation on a mobile home as you would for a regular home. While about 30% of mobile homes use vinyl siding, you can also choose stone, cedar, wood, or metal siding. Some types of siding such as fiber cement, brick, or real wood will require additional foundation blocking so the home can manage the extra weight of the siding. Adding new siding can add value to your manufactured home, improve its curb appeal, and even improve energy efficiency.

Improved energy efficiency is one of the best reasons to put new siding on your mobile home. Siding increases the R-value, helping manage your home’s interior temperature, keeping it consistent for a longer time. The improved insulation puts less strain on your heating and cooling system, so they use less energy. If your manufactured home is permanently installed and there are no plans to move it, to further enhance the energy efficiency, you can also add more insulation or foam board before installing the siding.

What color siding has the best resale value?

Many people choose siding installation over painting the home. Siding lasts longer and can be just as aesthetically appealing as paint. This has its advantages when you are selling your home, especially when you take into consideration color choices. In fact, color can be one of the main deciding factors when it comes to choosing a home. Recent market research shows that relatively neutral colors tend to be preferred over something loud or extravagant. Some of the most preferred colors include light browns like beige or taupe, as well as gray and blue. White siding and other neutral colors with bolder or darker trim is also popular.

Siding Installation on a New Home.

Siding installation near me

If you are planning a siding project and are looking for trusted local experts for siding installation in Long Island and Farmingdale, NY, search no further than All American Home Improvement Inc. We provide an extensive range of siding options. Learn more or get an estimate by calling (516) 986-3979.

What is Involved with Roof Restoration?

What is Involved in Roof Restoration?

Are you wondering what is involved in a roof restoration service? If so, you are not alone. Many people would like to know how the roof restoration process is accomplished. Please review the following bullet points to learn more.

  • The age of the roof plays a significant role in roof restoration. For example, when the roof was originally installed with play a large part in when it is time for a roof restoration. What is the current condition of the roof? What is the predominant roof material? All of these questions are important and will need to be properly addressed by a reputable roofing company.
  • If your roof is displaying significant signs of damage such as roof leaks, you will need to schedule emergency roofing maintenance immediately. Please do not hesitate to give your local reputable roofing company a call.
  • A local, professional roofing contractor will be able to determine signs of wear and tear and create an effective solution to clean the roof thoroughly, repair all signs of damage, and then give the roof a thorough and impressive new roof coating. If you have a tile roof as opposed to a flat or low-slope roof, the last phase will differ slightly.
roof restoration

How Do You Restore a Roof?

Generally speaking, restoring a roof entails that roofing contractors will be hired to conduct the process of cleaning, repairing, and replacing the existing roof. For a tile roof, it will entail the same procedure as it relates to cleaning, repairing or replacing tiles on the roof with new roofing tiles. The entirety of the roof must be addressed during this process. No part of the roof must be ignored.

What Paint Do You Use on Roof Tiles?

Are you wondering what paint to use on your roofing tiles? The answer may surprise you. According to leading experts, the best paint to use on roofing tiles is acrylic paint. After pressure cleaning and priming have been completed, the surface of the roof is ready to be painted with a high-quality, 100% acrylic paint.

Are Roof Coatings Any Good?

There is no question regarding whether roof coatings are good because they can immensely improve the health of the existing roof. When a roof restoration occurs, all the repairs take place, and a fresh coating is applied over the roof, further protecting it from damaging weather elements. In addition, it is important to remember that the thickness of the roof will play a pivotal role with regard to how long the roof lasts. Generally speaking, roof coatings last about ten years.

Is Roof Painting a Good Idea?

Exterior paint is very different from the paint used for roof coatings. Roof coating paint is thicker and has more UV protection. If you are considering a roof paint job, it is best to consult with a viable roofing company concerning what the best path is for your roof. A roof restoration or a roof replacement may be the best option for your home or property.

How to Do Roof Restoration

When was the last time you had your roof professionally inspected? Depending on the current condition of your roof, it will be important for you to chart a course of action that will protect your property both in the long and the short term. A roof restoration is the process of cleaning, repairing, and recoating your roof so that it can function as near to its original condition.

How Long Does Roof Restoration Take

If you have a small and vital window available to you for any necessary roof repairs, it will be important for you to understand the roof timeframe. The ultimate answer depends on how large your roof is. Larger roofs will take longer than smaller roofs. The best answer for your roof timeframe will come from a professional roofing company with many years of experience.

How Long Does a Roof Restoration Last

A roof restoration can last as long as twenty to twenty-five years. It is important to remember that roofing maintenance has the positive impact of helping your roof last longer. The more roofing maintenance you invest in, the more your roof will exhibit necessary durability over the years.

roof restoration

Roof Restoration How Often

Commercial roofs have a propensity to require repairs over the years despite exhibiting great efficiency. When it comes to your commercial roof installation, you can expect your roof to last about twenty years. With a roof restoration, your roof can last tent o fifteen years longer. The best person to speak with regarding your roof restoration is a proper roofing company. A good project manager will be able to discuss all the important details with you.

If you are in need of a roof restoration in Long Island and Farmingdale, NY, please reach out to today. We can be reached at (516) 986-3979.

Home Painting Interior & Exterior

close up of male in gloves painting a wall

Get to Know More About Home Painting

When it comes to home improvement, there are both interior and exterior areas that will have home painting implemented for stand out styles and themes. When it comes to the logistics of home painting make sure to get the right information so that there are no issues made from poor technique, skipped steps or doing work when conditions don’t allow for it. Ultimately, relying on a professional home improvement company for your home painting endeavors will ensure that quality is met. Until the time comes when you begin your projects, here are some general background information regarding home painting that may prove useful to you. 

Should I paint my house myself?

Home painting will require skill and stamina and usually isn’t a one-person job unless you wish to slowly get through it on your own. Ultimately a professional will have the time, crew, tools, and skills to do the work right. Another thing to consider is that different surfaces will require different paint, protocol, and technique. What’s more the depending on the size, height, and condition of your home, preparation and home painting will be a tedious and challenging job.

When should you paint your house?

Your home painting should be conducted every 5-10 years according to experts depending on several factors such as where you live, weather, climate and the previous paint job. Additionally, depending on the surface that was painted when to repaint will range differently. With wood siding for example you should paint it every 3-7 years and if it’s stained than every 4. 

What is the best time to paint house exterior?

The best time for exterior home painting is during the fall or spring when it’s neither too hot or cold. The best temperature range will lie between 50℉-85℉.

How do I prepare my house for painting?

You may be able to prepare you home for home painting by cleaning any surfaces free from dirt, chalk or mildew. After cleaning the house scrape off peeling or cracked paint, sand the surface for smoothness and prime the area. Areas that are to be painted should be clean, dull and dry. It you are painting the exterior of your home make sure to cover plants with plastic so that they’ll be protected. 

When painting a room where do you start?

When tackling a room with home painting it’s best to first start painting the ceiling and then the walls. Cover large expanses of areas, like walls, with paint before conducting more detailed work like repainting the trim. Keep in mind your pace when painting large areas as typically you’ll work more quickly which can result in overspraying, roller splatter, or periodic errant brushstrokes.

House Painter Wearing Facial Protection Spray Painting A Deck of A Home.

How do you paint a room like a pro?

  • Prep: Clean surfaces and repair any defects.
  • Prime: Where needed, prime the walls and trim.
  • Caulk: Fill any gaps or cracks with caulk.
  • Ceiling: Paint ceiling first to prevent drips on walls.
  • Walls: Apply paint to walls using a roller.
  • Trim: Paint trim last to avoid roller splatter.
  • Cleanup: Clean brushes and rollers, remove drop cloths, and replace furnishings.

Can I just paint over old paint?

Simply painting over old paint with home painting can be achieved yet in order to get a better turn around, better adherence, and a smoother painting experience using a primer or sealer is the best method to use. If you are using a similar color you might be able to skip this step. Keep in mind that surfaces will build up grime, grease, or dirt and form cracks or punctures. Make sure to have surfaces cleaned, smoothened out, cracks and punctures filled. For cleaning some choose to wipe walls with a damp cloth yet this may be too time consuming for others. For cracks and punctures people use fillers. As such an easy method will be to apply one coat of primer as a base and then one coat of the new paint.

Do you need to prime before painting?

With finished walls a primer can be optional with home painting yet if the finish is glossy or covered in a greasy film than it is recommended. With old homes that have oil based paint, prime with latex primers to ensure that there will be better adhesion with latex topcoats.

Do ceilings need two coats of paint?

When it comes to painting a ceiling it will actually depend on the type of paint that you get. Most ceiling paints will require two coats of paint yet some are formulated to where you’ll only need one.  

Can I cut in one day and paint the next?

It’s better to cut in one wall with home painting then immediately roll out the wall before cutting into the next one. If you roll the wall right away when the cutting paint is still wet the blending will be better and it will reduce the chance of lap marks.

Get in Contact With Your Local Home Improvement Company

When it comes to home painting make sure to rely on the professional skills and services of your local home improvement company. Home painting can refresh the look of your home’s interior and exterior surfaces and provide a pop of color that will be aesthetically pleasing. Improve the design of your home with the attractive implementation of fresh home painting.

If you’re interested in skilled home painting in Long Island and Farmingdale, NY call (516) 986-3979 with All American Home Improvement Inc!

How do you repair a leaking skylight?

skylight repair

Repair Services and More

Skylights can add another dimension to a room. It allows natural light in or allows you to gaze at the stars at night. A skylight can make what would otherwise be a dark, small room, seem brighter and larger, a benefit for any home, until it leaks. Then, until the skylight repair is done, it can be a sore spot in the home. 

Because a skylight is part of the roof, when you do need skylight repair, you want quality skylight repair by a qualified skylight repair company. Anyone that attempts a skylight repair can do more damage to the skylight and the roof, causing the homeowner more repair expenses and trouble. 

Just as you would only have the qualified doctor remove your tonsils, you should only have a qualified specialist do any skylight repair and installation. A roofing contractor or handyman may offer their services of skylight repair, you should verify their previous work for skylight repair or replacement before hiring them. 

How do I know if my skylight seal is broken?

Well, If there is water pouring through the seals of your skylight, repair is obviously needed. It usually starts with drips during a hard rainstorm, you’ll find water on the floor and furniture. Or you may get a continuous, serious leak, showing there is a serious problem with your skylight.  

Other times, condensation indicates skylight repair on the inside, but in a bathroom where the room is often damp, doesn’t always indicate a leak.  Or if your skylight window is glazed, you may notice condensation build-up. If you believe there is a leak coming from your skylight, you need to reach out to a qualified roofing contractor to inspect the skylight and your roof immediately. 

The following is a list of things that a roofing contractor may find on your roof and around your skylight that could cause the leak and dictating the need for skylight repair.  The more informed you are, the better you can make the right decision: 

Flashing Damaged or Missing – your skylight has metal strips surrounding it that is fastened to the roof. Over time, flashing breaks and corrodes with exposure to the weather. This allows a skylight to leak in those areas where the flashing has weakened.  New flashing or repairing it with flashing cement is easy skylight repair.  It is possible that some shingles may be loose or missing around the skylight, which will need to be replaced with new flashing. 

Roofing Cement – roofing cement is a temporary skylight repair, it can become dry and cracked, allowing water to seep in around the skylight. 

Incorrect Installation – Sometimes a leaking skylight is because it was installed incorrectly. The only alternative to skylight repair is skylight replacement.  Calling a qualified roofing contractor to inspect your skylight, they will inform you the choices you have and the option. 

Weep Holes Blocked – Skylights are installed with weep holes around the glass that allow any water from condensation to leak outward instead of in your home. If they become blocked, the water has nowhere else to go but through the skylight edges.

skylight repair and installation

What is the life expectancy of a skylight?

Skylights with unique placement will provide a home natural light where lighting is limited. The typical skylight can last between eight and fifteen years, depending how it was installed, the quality of the skylight, and climate exposure.

Skylights are like anything, there are better manufactured units and if a skylight is installed incorrect, it can begin leaking around the frame. Rare, but skylights get broke, usually because of weather issues, sometimes from age. This is also where how a skylight repair is done comes into effect too. When caulk or sealer is applied with allowing breathing room for the skylight to contract and expand with the weather, it can crack. 

How often should skylights be replaced?

Every time you have your roof replaced, which is typically twenty to forty years, unless there is weather damage.  Why? Consider that if you have your roof replaced at the 20 year mark and not the skylight, repair will be needed for the skylight within the next 5 to 10 years, maybe replacement.  Why have a contractor to do the roof and have them come back in five years for the skylight? 

Should you replace skylight when replacing roof?

Yes! See the answer above when to replace skylights. Additional reasons to replace your skylight when you replace the skylight: 

1). It is easier and less expensive to replace an existing skylight while replacing the roof.

2). Today’s skylights are installed better than the original skylights to guard against damage from condensation. 

3). The roofing cement used on the original skylight has probably reached its life expectancy.

 4). Today, there are federal tax credits for energy efficient skylight installation. 

How do you waterproof a skylight?

You can install and waterproof a skylight with these five steps: 

When you have your roofing replaced or repaired, examine the flashing around the skylight. Most skylights in homes are on a raised curb that is watertight because of that flashing. Sometimes, it can be re-used if removed carefully, otherwise, you must have new metal flashing installed. Professionally installed flashing can make a vast difference whether a skylight repair is needed later due to leaking.

Bring This To A Close

A skylight can be a wonderful upgrade to your home. Proper installation and maintenance are important to having a skylight you can enjoy or skylight repairs. Contact (516) 986-3979today for professional skylight repair in Long Island and Farmingdale, NY with All American Home Improvement Inc.

Do you really need gutters on a house?

gutter installation

How do you keep water away from your house?

When water is allowed to constantly rush the edges of your home damages can happen to your situation and eventually show in your foundation. To keep that from naturally occurring, a drainage system is required and one such method for most Americans comes in the form of a gutter system. The way this and other drainage systems work is that they are situated in a place where water would naturally flow and carry it to a place that would not cause damage to your property. There are several benefits to an efficiently operating gutter system, some of which include:

  • Far less masonry staining
  • Sustain soil and keep landscaping in better condition
  • Fewer mosquitoes 
  • Less mold and mildew

Gutters for the most part are the primary reason as to how many Americans enjoy their property without fear of rainwater causing any sort of heavy erosion. While there are more systems that can serve your home, gutters have historically proven themselves the best option for homeowners in areas with a moderate amount of rain like that of Long Island and Farmingdale, NY. When used with gutters, proper yard maintenance and other techniques can keep your property looking fantastic after every rainstorm. So when you need installation or repairs for your gutters, trust All American Home Improvement Inc to get the job done. Call (516) 986-3979 today to schedule an appointment with one of our roofers today.

Do gutters increase home value?

Gutters provide multiple benefits to your home and do not necessarily stand to raise the overall value of your home by themselves. However, the drainage system does stand to assist in the endeavor of increasing your home value. The reason being is that it helps avoid standing water around the property and as mentioned keeps water from the roof from fully cascading over the edge. So when you take on a construction project or make improvements to your roof or yard, the gutter system can help in that process.

On the subject of installation and construction, a person is able to apply a gutter system to their own home. However, it should be noted that the process involves multiple that go into several segments of your roof and home. We suggest having an expert get the job done, like those found at All American Home Improvement Inc. The same suggestion goes to replacing and removing your gutters as well. All three process requires a person to measure out the edges of their roof, apply the support system and then the gutters.

How long do gutters last on a house?

Depending on the material you choose, your gutters can last between just under a decade to over fifty years. The reason being is that gutters are made to take a constant amount of punishment from the elements while maintaining a certain look also depending on what you choose. They can be painted or delivered with a certain look built-in. Either way, the materials that you can choose from for your gutter system include: 

  • Copper
  • Galvanized steel
  • Aluminum
  • PVC
  • Vinyl

While copper gutters last the longest with a normal fifty year lifespan, the most popular options are often galvanized steel and aluminum with twenty year lifespans. All three tend to be able in fitting specific appearances for homes that they are installed upon. When that process is undertaken, gutters are placed generally as the last addition when the house is built. The specific area of the installation positions the system slightly off the eaves for the most optimal capability in gathering rainwater rushing off of your roof. The support system that is nailed in to hold the gutters can often be seen hanging from the fascia board that keeps moisture from the attic.


Why don’t new houses have gutters?

Much of the United States has a different environment compared to Long Island and Farmingdale, NY that either requires a distinct format for gutters or makes them irrelevant in the construction process. For states that are arid and dry, gutters are often only added on by the homeowner if at all because there is not as much rain. While states like Florida and Georgia have either specialized gutters or different systems entirely due to that the rain is far more torrential than what would be seen in other states. 

Part of the upkeep process with gutters is the problems that come with heavier storms or damages caused by the more severe weather patterns. For example, those not built for snow in areas All American Home Improvement Inc provides for tend to get damages from ice and snow buildup. For that reason, there tend to be specializations for gutters in the area accompanied by services that take care of the colder weather patters. The importance of gutters in colder areas also helps a homeowner from developing ice on their driveways and sidewalks. While not a surefire way of getting rid of the problem, it does extensively help to level down the issue from becoming heavy. 

When you need gutter installation or repair services, you can rely on us to get the job done. Call (516) 986-3979 today to schedule your appointment with one of our expert roofers at All American Home Improvement Inc. Improve your gutters in Long Island and Farmingdale, NY today.

Is Roof Flashing Important?

roof flashing repair around chimney

Understanding and Maintaining Your Roof

Under no circumstance does a homeowner want to find a roof leak in their home. These are often damaging and costly services that will require time and energy that you may not have. What’s worse is that trying to find where a leak is originating can be one of the more challenging aspects of the whole process. The most common area for leaks is around joints or where flashing would be. If you are in need of roof flashing repair in Long Island and Farmingdale, NY, dial (516) 986-3979 to connect with the pros at All American Home Improvement Inc.

roof flashing repair

What is Roof Flashing?

Roof flashing is a piece of thin aluminum or galvanized steel that is often installed under most roofing materials. The purpose of this sheet of metal is to help direct rainwater away from your roof and your home so certain areas don’t become overly saturated with water. A rule of thumb is to install flashing anywhere there is a joint or where the roof meets a vertical plane. This would be around areas such as the chimney, skylights, vents, as well as where the roof meets a wall. Now, the flashing on your roof can become damaged over time. It is metal, which means that it can, and usually does, rust or corrode. Roof and flashing repairs don’t have to happen at the same time, especially if your roof is still in relatively good condition. There are several things to look for if you are concerned about the flashing on your property. What is roof flashing repair? It’s pretty much exactly what you think it would be. It’s the process of repairing or replacing the flashing on your roof so it operates efficiently and properly.

Signs You Need Roof Flashing Repair

Not all roof leaks are the same. Anyone that has experienced a roof leaking and needed roof flashing repair knows this. The best thing you can do to avoid costly repair or replacement services is investing in regular inspections. During those appointments, contractors can take care of any roof flashing repair need before things get bad. 

  • Rust or Corrosion: As mentioned, most flashing is made from aluminum or galvanized steel. While these are both highly durable materials, they are subject to rust or corrosion over time. This will weaken the material, causing it to deteriorate, buckle, and become less effective at directing water. 
  • Visible Holes or Gaps: Whether it’s because of rust, corrosion or some other factor, if there are holes in your flashing, you’re going to have a problem. In some cases, the material may lift up or be removed partially from the roofing structure. All it takes is one gap to allow water in and begin the deterioration process. 
  • Dents: If a major storm has blown through, every aspect of your roof can be affected. Hail is the number one enemy for roofing because of just how much damage it can inflict and that includes your flashing. Hail can severely dent the flashing, causing it to bend, buckle, or lift away from the roof. 
  • Leaks: And of course, the fastest way to determine if you have damaged roof flashing is by finding a leak. It’s the most unfortunate way to figure this out, but a leak can help you find the source of the problem. Once you know that, you can take the necessary steps to make the repair or replacements to correct it. 

Finding a leak or roof damage is never an ideal situation to be in. Roofing services can get pricey and flashing repairs are no different. Total roof flashing repair can cost upwards of $500, not including any roof decking, chimney, or other repair service that needs to be completed. We understand that it can be overwhelming to figure all of that out. That’s why when you need any kind of roofing service, rely on All American Home Improvement Inc for assistance. Our contractors can easily find any potential damage or problem then address it with accuracy and efficiency.

Frequently Asked Questions

  • How much does it cost to repair flashing on a roof?
    • On average, homeowners should budget for about $300 and $500 for flashing repairs. The total amount will vary if you need additional repair services for your roof, chimney or other areas where flashing may be. 
  • Is roof flashing necessary?
    • Flashing is incredibly important to your roof for a number of reasons. This will help direct water away from your roof so it doesn’t collect or pond in troublesome areas. So the short answer is, yes, roof flashing is incredibly important for your roof.
  • What does roof flashing look like?
    • As mentioned, flashing is just thin sheets of metal, usually aluminum or galvanized steel. They are typically longer than they are wide because they are primarily used around roofing and wall joints. 
  • How long should roof flashing last?
    • Flashing needs to be able to last about the same length of time or longer as your roof itself. This means it needs to be able to last upwards of 20 years or longer. However, because of how often flashing comes in contact with water, it can corrode and degrade sooner than that, so you may get about 15 years total.

Connect With Our Team Now for an Appointment

Dial (516) 986-3979to schedule an appointment for roof flashing repair in Long Island and Farmingdale, NY with the experts at All American Home Improvement Inc. We are here to help you, so give us a call today!

How often should you have your roof inspected?

damaged roof in need of inspection

Is it time for inspection?

Having your home’s roof inspected regularly is simply smart homeownership responsibility. Having a roof inspection once a year or after a significant weather activity gives you the opportunity to fix any minor issues before they become a bigger catastrophe. You can find a contractor that provides both roof inspection and repair services, usually, the inspection will be free if there is any work to be done and you accept their bid. Otherwise, there may be a small fee for the roof inspection only. Sometimes, you’ll be required to have a roof inspection for insurance, but most times, the insurance company will have their own inspector perform the inspection at no cost to you.

Most roofing contractors that perform a combination of roof inspection and gutter cleaning, which will save you money in the long run. Because one works with the other, having them both inspected and cleaned at the same time simply makes sense. If you are considering purchasing a house through traditional methods of financing, your lender will require different inspections of the house, such as wood-destroying insect inspection, engineering inspection, and structural inspection, with that inspection, a roof inspection is done as well. What if it is raining the day of your structural inspection is scheduled?

Well, there is no better time to have this done, especially the roof. A roof inspection in rain will show even the smallest possible leaks. A rainy-day roof inspection will allow the inspector to test how the roof and gutter system is doing in divert water down and away from your house.

What is included in a roof inspection?

The first line of defense for your home is the roof, and if it isn’t in top condition, it can’t do a good job at the defense. As a homeowner, you need to be diligent in the maintenance of your roof so that when the smallest issue is discovered, you can get it repaired before it becomes a bigger issue. Part of that maintenance is having a roof inspection performed by a roofing expert that will know what possible issues look like and can advise you accordingly. 

So, what should you expect during a professional roof inspection? The goal of a roof inspector is to find things wrong with your roof. They look for leaks, organic growths, issues, and unusual wear and tear damages from windblown debris, workmanship of installation and/or repairs.  There are four components to a roof inspection: 

  • The Structural Aspect: The roof inspector will look for any signs of sagging like uneven roof planes. They check the fascia, gutter system and the soffit. They examine the chimneys, looking for cracks or crumbling grout, damaged chimney caps, and they go inside the attic to check the venting is in proper working order. 
  • The Material Aspect: The roof inspection will include looking at cracked or curled shingles, loose or missing shingles. The roof inspector will look for any algae, lichen, mildew, moss, and rust or stains. They make sure all fasteners and flashings are in order and that the downspouts, gutters and roof valleys are not full of aggregate from the shingles. The roof inspector will check the rubber and seals around HVAC and plumbing vent pipes. 
  • The Interior Aspect: Because any size of a roof leak can damage your home’s interior, a roof inspection includes the interior to be inspected. Besides the attic, they will examine the ceiling and walls for mildew, mold, rot, and water stains. 
  • The Workmanship Aspect:  A thorough roof inspection will include examining the workmanship of the roof, making sure it was installed correctly, or any repairs have been one correctly and thoroughly. This will include the workmanship of the chimney, HVAC and plumbing pipes and vents, and any skylights. 

How long does a roof inspection take?

The time for a professional roof inspection depends on several factors, with the first one being the size of the house.  A 1200sf house won’t take as long as a 4000sf house. How many levels to the roof are there will make an impact in the time it takes and how many attic accesses there are.  The time can be as little as 45 minutes up to 2 or 3 hours, maybe longer.

What are the signs of a bad roof?

There are several signs that will tell you that your roof has reached its life expectancy. If you choose to ignore these signs, you could have some major issues to deal with later, more than just replacing the roof. Here, we have listed 10 signs that you need not ignore: 

  1. Loose or missing shingles. This can result from a storm or high winds. But missing loose or missing shingles means your roof has lost some protection.
  2. Blistered, cracked, curled, or dry shingles is the number one sign that your roof has lived a full life. The climate and environment are brutal on a roof today, and if the attic venting in your home isn’t working correctly, that can cause your roof to expire sooner than expected.
  3. A sagging roof can show that your roof is deteriorating from the attic inside or the roof rafters are weak. It can also mean your roof was not installed properly to start with.
  4. Dark areas on a roof are usually where the shingles are missing It can also show there are algae, lichen, moss growing on your roof and are eating away at the shingles.
  5. Gutters and downspouts filled with granules indicate that the asphalt shingles on your roof are wearing out.
  6. Exposed and loose nail heads mean the holes where the nails were installed have gotten large and the nails can easily come out. Moisture will begin getting in around those holes and that will lead to severe moisture damage. 
  7. Water spots and stains in the attic, on the ceiling or walls, indicate that there is water getting in through the roof at some point and has made its way past the flashing and underlayment.
  8. Damaged, loose, or missing flashing around projections such as the chimney, HVAC or plumbing pipes and vents is allowing moisture in the attic and under the shingles. 
  9. When your roof has reached its 20th birthday of installation, it is time to get quotes and shop around for a new roof installation. The average lifespan of an asphalt roof is 20 to 25 years.
  10. Your energy bills have increased month after month, year after year is a sign that the attic insulation needs additional being installed, or maybe you don’t have any at all. It can also show the vent system isn’t working correctly.

What happens if you don’t replace your roof?

Any delay in addressing any of the above indicators found in a roof inspection that you need a new roof can lead to severe damage to your home. An extreme example would be that your home could collapse if the roof were to give in because you ignored the signs we’ve discussed.

roof inspected and found to be in good condition

Does insurance pay for a new roof?

Typically, every legitimate homeowner’s insurance policy will pay for repairs and replacement of a roof from damage by all-perils that are an act of nature. What insurance companies won’t pay for are roofs that have been neglected by the homeowner or a roof that has reached their prime life expectancy. Every homeowner should review their homeowner’s policy and discuss the coverage with their agent. Roofing is an expensive part of a home, but it is an essential part of the home. It protects you, your family, and all your belongings. Without a roof, our homes wouldn’t need other necessities that we find convenient today like central heat and air. A roof inspection will allow you to address any issues found and make them right as soon as possible. Call (516) 986-3979with All American Home Improvement Inc today for your roof inspection in Long Island and Farmingdale, NY.

How Much Does it Cost to Replace a Window?

A new window replacement can increase the energy efficiency of your home.

How Much Does it Cost to Replace a Window?

Home window replacement is an important home improvement project. As such, it’s integral to consider the costs. With regard to replacing a window, the average cost is approximately $300 to $700. This cost is based upon the assumption that the replacement will be occurring in a structurally sound frame on the ground floor. A fairly stable estimate for a regular three-bedroom, single-story home with ten openings can range from $3,000 to $7,000.

What Are the Best Replacement Windows?

There are many wonderful window brands to browse. According to a national website, Andersen windows, Pella Windows, and Milgard windows are all phenomenal window brands. Simonton, Harvey, and Loewen are also highly-rated. It’s always a good idea to conduct some research about what brands manufacture a window according to your needs and the measurements of the space. There are many different varieties of windows, and it will be important to review whether or not you would like a screen or double-paned windows.

Can You Replace Your Own Windows?

If you are an experienced home repair specialist, it will not be terribly difficult to replace your own windows. If, however, you are inexperienced, window replacements can be extremely tricky. For example, an insert replacement window will allow you to keep the existing window frame and trim. This process should be fairly straightforward if you have the right tools. On the other hand, a full-frame replacement window will require a complete tear-out and replacement of the existing frame. While it is true that you can attempt and complete many DIY projects on your own, including asphalt shingle repair, it’s always important to retrieve an expert opinion from a qualified resource. A roof repair company, for example, will be able to confirm the skill level and what precautions need to be made.

Is it Worth it To Replace Windows?

If you are pondering whether or not it is worth it to replace your windows, you will want to consider the benefits in earnest. Please review the following factors to determine if window replacements will suit your home agenda.

  • Lower energy costs. An energy-efficient window replacement is one of the most effective ways to decrease your home’s energy costs.
  • UV protection. While having natural light in the home is an exceptional aspect of windows, UV rays can prematurely age your furniture and simultaneously heat up the home. 
  • Less maintenance. When windows are newer, less maintenance is necessary.
  • Increased home value. When windows are replaced, homeowners can expect increased home value. 

Can You Replace Windows Without Replacing the Frame?

Homeowners should understand that it is perfectly reasonable to replace windows without needing to replace the frame. If the frame is in fine condition, there shouldn’t be any issues with merely replacing the old window with new materials of the same size and in the existing frame.

How Much are Replacement Window Panes

According to a national website, window replacement costs average out to be approximately $175 to $700 per window. For high-end windows, the cost can vary between $800 and $1,200. It is also important to consider that the installation cost can depend on different factors, including the cost of living in that part of the country.

Can I Install Replacement Window Myself

While it is true that you can install replacement windows on your own, it is inadvisable that you move forward with such an endeavor without a serious knowledge of the processes. If you end up with the result of a leaky window, you could easily double your original costs. Homeowners should acquire a basic understanding of how the original window was installed, and how to deal with the usual installation issues. It is also important to remember that measuring for a replacement window is not the same as measuring for a full-frame replacement. 

Will Home Insurance Cover Window Replacement

Usually, homeowners’ insurance covers natural disasters and circumstances like fires. If you are replacing your windows because they are drafty, it is highly unlikely that homeowners’ insurance will cover the cost. Homeowners are generally advised to review the deductibles and coverage limits of their policy and determine the circumstances of their policy for themselves.

Your window replacement is in good hands with our professional company.

Window Replacement with Vinyl Siding

The first thing that homeowners should do when they are contemplating a window replacement with vinyl siding is to prepare the window. All the drywall on the side and the outside of the window frame needs to be cleared. A utility knife is a handy tool for scoring the window. Then, the window and the screen can be removed. The perimeter of the window frame will need to be cut. Once all the pieces of vinyl siding are removed, the vertical length of the open space can be measured. As always, it is important to consult a professional before attempting any serious do-it-yourself-project, such as window replacement.

Have you experienced a window issue? Our friendly team at All American Home Improvement Inc are available now at (516) 986-3979 to schedule your window replacement in Long Island and Farmingdale, NY.