Are you tired of the way the exterior of your home is looking? There are a couple of easy ways to improve the look of your home without spending a ton of money; you can either paint the exterior walls, add new plants, upgrade the look of your shutters, and or add new address numbers. However, if you really want to invest in how your home looks, one of the best ways to do that is with siding. Siding is a material that is attached to the exterior walls of your home, providing it with protection as well as aesthetic appeal. There are several types of siding materials on the market, such as metal or fiber cement, but the material that is most common is vinyl. Vinyl siding is made of PVC (polyvinyl chloride) resin, so its an incredibly sturdy siding material. A lot of people wonder “Which is better stucco or vinyl siding?” They are both energy-efficient, but siding is easier to maintain and it’s more durable.
Many people who are interested in vinyl siding installation typically ask, “How much does it cost to put siding on a house?” Depending on the material that is used, as well as the size of the home, is going to factor into how much siding installation will cost. When it comes to vinyl siding installation, it can be anywhere from $5,655 to $13,890 to install. Because installing vinyl siding can be expensive, another question that homeowners ask is, “What is the average labor cost to install vinyl siding?” Again, a lot of factors determine the labor cost–it can depend on how long it takes, how many people are installing it, and also if you are going with a company or a general contractor. While vinyl is one of the best siding materials, the cost can add up. If you think that you want to install vinyl siding in your home, it’s important to know the vinyl siding installation steps. Here is a how-to vinyl siding installation guide.
- Remove Objects: If there is anything on your walls security lights, address numbers, or something else that will get in the way, remove them.
- Measure: Next you will want to measure from the roof eave to the bottom of the exterior wall to determine the height of the starter strips.
- Nail Starters: Then you will want to nail down the strips to the corners of the walls.
- Nail Down Trim: After the starters have been nailed down, you will then want to install and nail down trimming that will go exterior doors and windows.
- Install Bottom Siding: Snap the panels of siding in and then nail them down.
- Install Around Windows and Doors: When you get to the doors and windows, you will need to cut the siding to fit those areas.
- Install Top Siding: When you are close to finishing installing siding to the top of the wall, add utility trim, then snap in panels to complete the installation.
While vinyl siding installation can cost a lot in labor and materials, it is worth it to invest in professional installation by a contractor who knows what they are doing. It will take less time and be less of a headache if they install the vinyl for you. You run the risk of complications as well as taking too much time, so calling a contractor who has installed vinyl siding before might be something to consider.
Vinyl Siding Installation Tips
If you really want to take on a vinyl installation project on your own, what you need are some good tips. Having siding installation tips can make the installation process a lot easier and may even cut down on the time. One tip that can really reduce stress is to pull the siding up as you nail it in. The siding can unlock, so lifting the panels up while you nail them in will keep them locked in place. Another helpful tip is to buy a blade that specifically cuts through the vinyl. If you try to cut vinyl with a blade that isn’t made to cut vinyl, you will have a lot of issues on your hands.
When you are installing the panels, make sure that you install the longer panels before the shorter ones. The reason for this is because the longer ones don’t quite stretch like the shorter ones, so if they need to be adjusted it will be harder when you wait to install them at the end. Lastly, if you make a mistake and you need a panel of siding that you have nailed down, you can use a zip tool. Depending on the brand of vinyl that you get, there will be other instructions that can give you more tips to follow. In terms of what brand of vinyl siding is best, CertainTeed has got to be one of the best in the industry. After you have completed your vinyl siding installation, you may be wondering, “What is the average life expectancy of vinyl siding?” If the installation is done correctly, you can expect the vinyl siding to last 60 years or more.
Vinyl Siding Installation Mistakes
When installing vinyl for the first time, you want to make sure that there are no mistakes. There are couple of ways in which you could avoid making horrible mistakes when installing vinyl siding. First, you will want to invest in a high-quality material. This is because it will last longer and will look a lot better. Another thing you will want to be sure of is to add foam to provide extra protection for your wall. Nailing the panels down needs to be done just right; if they are nailed down too tightly, the nails won’t be able to expand when the temperatures become hotter. If you want to avoid creating pronounced seams, you need to stagger the seams.
If you want vinyl siding in Long Island and Farmingdale, but don’t want to install it yourself, call the contractors at All American Home Improvement Inc for help. We can offer excellent home exterior services that include vinyl siding installation. Investing in a professional means you will get better-looking siding at the end of the day. For example, if you had an apple computer and it was broken, would you want to repair it or take it to someone who knows what they are doing? With the help of a licensed